Novus 26
Novus 26 is a premium quality compressed sheet material composed of aramid fibres with a SBR/Natural rubber binder system. It is specially formulated to exhibit controlled swell properties in oil combined with good resistance to water.
Service
Novus 26 is particularly suitable for the automotive industry, where controlled swell properties are required.
Availability
| Standard sheet sizes (m): | 2.0 x 2.0 2.0 x 1.5 2.0 x 1.0 1.5 x 1.5 1.5 x 1.0 |
| Thickness range (mm): | 0.5 to 3.0 |
| Standard roll sizes (m): | 6.0 x 2.0 |
It can also be supplied with anti-stick coating.
Physical properties
| Thickness | 1.5mm | |
| Density | 1.96g/cc | |
| Tensile Strength | ASTM F152 | 10.3MPa |
| Compression | ASTM F36 | 8% |
| Recovery | ASTM F36 | >40% |
| Residual Stress | BS 7531 (300°C) DIN 52913 |
19MPa |
| Gas Leakage | BS 7531 | <1.0cc/min |
| ASTM Oil 1 | Thickness Increase | 0-20% |
| IRM 903 Oil | Thickness Increase | 20-70% |
| ASTM Fuel B | Thickness Increase | 10-40% |
Novus 26 Pressure/Temperature Limits
1. Suitable subject to chemical compatibility.
2. Suitable in some cases but check your application requirements with Flexitallic.
3. Contact the Technical Team for applicatis on with higher temperatures and pressures. Applicable to 1.5mm and below.
The operating temperature of non-asbestos sheet material is related to the thickness of materials selected. Thinner materials give better temperature and pressure properties.
