Novus 28 is a high compression grade sheet material based on aramid fibres with a high quality nitrile binder system.
Novus 28 is specifically designed for use in low bolt-loaded irregular flanges. Typical flanges include glass lined, ceramic, plastic coated or uneven flanges.
|Standard sheet sizes (m):||2.0 x 2.0
2.0 x 1.5
2.0 x 1.0
1.5 x 1.5
1.5 x 1.0
|Thickness range (mm):||0.4 to 3.0|
|Standard roll sizes (m):||6.0 x 2.0|
It can also be supplied with anti-stick coating and graphite coating.
|Tensile Strength||ASTM F152||8MPa|
|Compression||ASTM F36||16 to 25%|
|Recovery||ASTM F36||>50% min|
|Residual Stress||BS 7531 (300°C)
|Gas Leakage||BS 7531||<0.01cc/min|
|ASTM Oil 1||Thickness Increase||1.0%|
|IRM 903 Oil||Thickness Increase||4.0%|
|ASTM Fuel B||Thickness Increase||4.0%|
Novus 28 Pressure/Temperature Limits
1. Suitable subject to chemical compatibility.
2. Suitable in some cases but check your application requirements with Flexitallic.
3. Contact the Technical Team for applicatis on with higher temperatures and pressures. Applicable to 1.5mm and below.
The operating temperature of non-asbestos sheet material is related to the thickness of materials selected. Thinner materials give better temperature and pressure properties.