Novus 45
Novus 45 is a medium quality cost effective compressed sheet material, manufactured from virgin fibres and recycled material, with a nitrile rubber binder system.
Service
Novus 45 is a general purpose material suitable for use with oils, solvents, gases, water, low pressure steam and most dilute acids and alkalis.
Approvals / Compliance
| TA-LUFT (in accordance with VDI Guideline 2440) |
Availability
| Standard sheet sizes (m): | 2.0 x 2.0 2.0 x 1.5 2.0 x 1.0 1.5 x 1.5 1.5 x 1.0 |
| Thickness range (mm): | 0.4 to 6.0 |
| Standard roll sizes (m): | 6.0 x 2.0 |
Available with fine mesh mild steel reinforcement: Novus 45 Metallic or gauze mild steel wire reinforcement: Novus 45 GWI.
It can also be supplied with anti-stick coating and graphite coating.
Physical properties
| Thickness | 1.5mm | |
| Density | 1.9g/cc | |
| Tensile Strength | ASTM F152 | 12MPa |
| Compression | ASTM F36 | 10% |
| Recovery | ASTM F36 | 50% min |
| Residual Stress | BS 7531 (300°C) DIN 52913 |
18MPa 23MPa |
| Gas Leakage | BS 7531 | <1.0cc/min |
| ASTM Oil 1 | Thickness Increase | 2.0% |
| IRM 903 Oil | Thickness Increase | 5.0% |
| ASTM Fuel B | Thickness Increase | 6.0% |
Novus 45 Pressure/Temperature Limits
1. Suitable subject to chemical compatibility.
2. Suitable in some cases but check your application requirements with Flexitallic.
3. Contact the Technical Team for applicatis on with higher temperatures and pressures. Applicable to 1.5mm and below.
The operating temperature of non-asbestos sheet material is related to the thickness of materials selected. Thinner materials give better temperature and pressure properties.
