CR1452 - Black High Elongation Grade EPDM Rubber 45° shore

High Grade EPDM suitable for use in applications where good weather and ozone resistance is required, also suitable for some mineral oils.

We can offer the following additional benefits on most of our sheetings:

Tacky - Back A bonding layer applied to one surface
Dry - Back Heavy Duty EP fabric layer on one or both sides
PU - Face A 2 or 3mm polyurethane coated surface layer

This sheeting is manufactured from top quality virgin materials and ingredients meeting a high standard of performance.

Material Profile See below
Thickness 1mm to 20mm
Sheet Size 1.4m wide in 5, 10 & 20m rolls
Finish Smooth
Cutting Standard press-tools

Other grades, colours and finishes are available (subject to minimum batch quantities)

Search Results:

Material EPDM
Application General Purpose, High Temperature, Weather / Ozone
Store Hardness +/- 5º 45
Thickness 3mm, 5mm, 6mm, 10mm
Temp. Range -30°C to +130°C
Colour Black
Insertion Req No
Cloth/Plate Plate / Plate
Resistant To Please call

Technical Data:

Stock Roll Sizes
[mm x mm x m]
Surface Finish Weight [kg/M²] Specifications Compound Values
3mm x 1400mm x 20m SS   Colour Black
5mm x 1400mm x 20m SS   Compound EPDM
6mm x 1400mm x 20m SS   Density [specific gravity] 1.20
10mm x 1400mm x 10m SS   Hardness [degrees shore A] 45° ± 5°
      Tensile strength [Mpa] 10.0
      Elongation at break 600
      Minimum temperature -30°C
      Maximum temperature +130°C
      Compression set (70°C for 22 hours) % 25

Need some information? Call us today: 01925 825552