Product Range:
CR1454 - Black Premium Soft Grade EPDM Rubber 50° shore
High Grade EPDM suitable for use in applications where good weather and ozone resistance is required, also suitable for some mineral oils.
We can offer the following additional benefits on most of our sheetings:
| Tacky - Back A bonding layer applied to one surface |
| Dry - Back Heavy Duty EP fabric layer on one or both sides |
| PU - Face A 2 or 3mm polyurethane coated surface layer |
This sheeting is manufactured from top quality virgin materials and ingredients meeting a high standard of performance.
| Material Profile | See below |
| Thickness | 1mm to 20mm |
| Sheet Size | 1.4m wide in 5, 10 & 20m rolls |
| Finish | Smooth |
| Cutting | Standard press-tools |
Other grades, colours and finishes are available (subject to minimum batch quantities)
Search Results:
| Material | EPDM |
| Application | General Purpose, High Temperature, Weather / Ozone |
| Store Hardness +/- 5º | 50 |
| Thickness | 3mm, 5mm, 6mm, 10mm |
| Temp. Range | -30°C to +130°C |
| Colour | Black |
| Insertion Req | No |
| Cloth/Plate | Plate / Plate |
| Resistant To | Please call |
Technical Data:
| Stock Roll Sizes [mm x mm x m] |
Surface Finish | Weight [kg/M²] | Specifications Compound | Values [typical] |
| 3mm x 1400mm x 10m | SS | Colour | Black | |
| 5mm x 1400mm x 10m | SS | Compound | EPDM | |
| 6mm x 1400mm x 10m | SS | Density [specific gravity] | 1.25 | |
| 10mm x 1400mm x 5m | SS | Hardness [degrees shore A] | 50° ± 5° | |
| Tensile strength [Mpa] | 9.0 | |||
| Elongation at break | 300 | |||
| Minimum temperature | -30°C | |||
| Maximum temperature | +130°C | |||
| Compression set (70°C for 22 hours) % | 25 |
