CR134 - Tan Para Natural Rubber 40° shore

High abrasion resistance , being classed as a ‘Para-Natural’ (or pure-gum). Produced from natural latex, this material is designed for applications including chute lining, shot-blast cabinet lining and seals, blade scrapers etc.

We can offer the following additional benefits on most of our sheetings:

Tacky - Back A bonding layer applied to one surface
Dry - Back Heavy Duty EP fabric layer on one or both sides
PU - Face A 2 or 3mm polyurethane coated surface layer

This sheeting is manufactured from top quality virgin materials and ingredients meeting a high standard of performance.

Material Profile See below
Thickness 1.5mm to 25mm
Sheet Size 1.4m wide in 5, 10 & 20m rolls
Finish Smooth
Cutting Standard press-tools

Other grades, colours and finishes are available (subject to minimum batch quantities)

Search Results:

Material Natural Rubber
Application High Abrasion, Shotblast
Store Hardness +/- 5º 40
Thickness 1.5mm, 3mm, 5mm, 6mm, 8mm, 10mm, 12mm, 15mm, 20mm, 25mm
Temp. Range -20°C to +70°C
Colour Tan
Insertion Req No
Cloth/Plate Plate / Plate
Resistant To Please call

Technical Data:

Stock Roll Sizes
[mm x mm x m]
Surface Finish Weight [kg/M²] Specifications Compound Values
[typical]
1.5mm x 1400mm x 20m SS 1.53 Colour Tan
3mm x 1400mm x 10m SS 3.06 Compound NR
5mm x 1400mm x 10m SS 5.10 Density [specific gravity] 1.02
6mm x 1400mm x 10m SS 6.12 Hardness [degrees shore A] 40° ± 5°
8mm x 1400mm x 5m SS 8.16 Tensile strength [Mpa] 15.0
10mm x 1400mm x 5m SS 10.20 Elongation at break 600
12mm x 1400mm x 5m SS 12.24 Minimum temperature -20°C
15mm x 1400mm x 5m SS 15.53 Maximum temperature +70°C
20mm x 1400mm x 5m SS 20.40 Abrasion resistance [mm3] 120
25mm x 1400mm x 5m SS 25.50 Compression set (70°C for 22 hours) % 30
Need some information? Call us today: 01925 825552