Product Range:
CR124 - Black Hard Economy Grade SBR 80° shore
A blend of Natural Rubber / Styrene Butadiene rubber. It is used where a cheaper quality material will suit – in simple applications such as packing pieces, dust seals, protection pads etc where the material is not coming under any duress.
Due to the nature and economy of manufacture [an amount of RECLAIMED materials are blended with base polymer and fillers] minor surface deformations and blemishes may occur and materials may be more odorous than normal.
| Material Profile | See below |
| Thickness | 2mm to 12mm |
| Sheet Size | 1.4m wide in 10 & 20m rolls |
| Finish | Smooth both sides |
| Cutting | Standard press-tools |
Other grades, colours and finishes are available (subject to minimum batch quantities)
Search Results:
| Material | NR/SBR |
| Application | General Purpose |
| Store Hardness +/- 5º | 80 |
| Thickness | 2mm, 4mm, 12mm |
| Temp. Range | -20°C to +70°C |
| Colour | Black |
| Insertion Req | No |
| Cloth/Plate | Plate / Plate |
| Resistant To | N/A |
Technical Data:
| Stock Roll Sizes [mm x mm x m] |
Surface Finish | Weight [kg/M²] | Specifications Compound | Values [typical] |
| 2mm x 1400mm x 20m | SS | 1.90 | Colour | Black |
| 4mm x 1400mm x 10m | SS | 5.80 | Compound | SBR |
| 12mm x 1400mm x 5m | SS | 17.40 | Density [specific gravity] | 1.45 |
| Hardness [degrees shore A] | 80° ± 5° | |||
| Tensile strength [Mpa] | 3 | |||
| Elongation at break | 140% | |||
| Minimum temperature | -20°C | |||
| Maximum temperature | +70°C | |||
| Compression set (70°C for 22 hours) % | 45 |
