Product Range:
CR102 - Black ‘Economy’ Grade SBR 50° shore
A Styrene Butadiene rubber , It is used where a cheaper quality material will suit - in simple applications such as packing pieces, dust seals, protection pads etc where the materials is not coming under duress.
We can offer the following additional benefits on most of our sheetings:
| Tacky - Back A bonding layer applied to one surface |
| Dry - Back Heavy Duty EP fabric layer on one or both sides |
| PU - Face A 2 or 3mm polyurethane coated surface layer |
This sheeting is manufactured from top quality virgin materials and ingredients meeting a high standard of performance.
| Material Profile | See below |
| Thickness | 3mm to 10mm |
| Sheet Size | 1.4m wide in 5 & 10m rolls |
| Finish | Smooth both sides |
| Cutting | Standard press-tools |
Other grades, colours and finishes are available (subject to minimum batch quantities)
Search Results:
| Material | SBR |
| Application | General Purpose, Shortblast |
| Store Hardness +/- 5º | 50 |
| Thickness | 3mm, 5mm, 6mm, 10mm |
| Temp. Range | -20°C to +70°C |
| Colour | Black |
| Insertion Req | No |
| Cloth/Plate | Cloth / Cloth, Plate / Plate |
| Resistant To | N/A |
Technical Data:
| Stock Roll Sizes [mm x mm x m] |
Surface Finish | Weight [kg/M²] | Specifications Compound | Values [typical] |
| 3mm x 1400mm x 10m | SS | 4.5 | Colour | Black |
| 5mm x 1400mm x 10m | SS | 7.5 | Compound | SBR |
| 6mm x 1400mm x 10m | SS | 9.0 | Density [specific gravity] | 1.5 |
| 10mm x 1400mm x 5m | SS | 15.0 | Hardness [degrees shore A] | 50° ± 5° |
| Tensile strength [Mpa] | 4.0 | |||
| Minimum temperature | -20°C | |||
| Maximum temperature | +70°C | |||
| Compression set (70°C for 22 hours) % | 50 |
