Novus 30

Novus 30 is a good quality compressed sheet material based on a blend of aramid and inorganic fibres with a nitrile rubber binder system.


Novus 30 is a general purpose material suitable for use in a wide range of applications, including hot and cold water, steam, oils, fuels, gases and a wide range of general chemicals

Approvals / Compliance

WRAS Potable Water: Registration No. 0008505
Complies with BS Specification 7531 Grade Y


Standard sheet sizes (m): 2.0 x 2.0
2.0 x 1.5
2.0 x 1.0
1.5 x 1.5
1.5 x 1.0
Thickness range (mm): 0.4 to 6.0
Standard roll sizes (m): 6.0 x 2.0

Available with fine mesh mild steel reinforcement: Novus 30 Metallic or gauze mild steel wire reinforcement: Novus 30 GWI.
It can also be supplied with anti-stick coating and graphite coating.

Physical properties

Thickness   1.5mm
Density   2.0g/cc
Tensile Strength ASTM F152 12MPa
Compression ASTM F36 9%
Recovery ASTM F36 50% min
Residual Stress BS 7531 (300°C)
DIN 52913
Gas Leakage BS 7531 <1.0cc/min
ASTM Oil 1 Thickness Increase 2.0%
IRM 903 Oil Thickness Increase 5.0%
ASTM Fuel B Thickness Increase 4.0%

Novus 30 Pressure/Temperature Limits

1. Suitable subject to chemical compatibility.
2. Suitable in some cases but check your application requirements with Flexitallic.
3. Contact the Technical Team for applicatis on with higher temperatures and pressures. Applicable to 1.5mm and below.

The operating temperature of non-asbestos sheet material is related to the thickness of materials selected. Thinner materials give better temperature and pressure properties.

Need some information? Call us today: 01925 825552